Milani Progressive Mixer & Spout Set – Brushed Brass
The Milani Progressive Mixer and Spout Set combines a smooth single hand mixer that uses progressive cartridge technology and an ultra-modern wall mounted spout that has harmonious water flow. This product allows ease of operation for the user with precise temperature control at a twist of the dial. When using progressive cartridge technology you twist in one clockwise motion starting at low-pressure cold up to high pressure cold. Once turned halfway warm water is introduced at full pressure. The dial is then precisely adjustable for the perfect temperature right up to maximum temperature when fully turned. The Milani Progressive Mixer and Spout Set will easily enrich your space with its sharp, sophisticated aesthetic. Please note: when using this product for a basin sink ABI recommends using a 5 or 6 star water restrictor. This is free of charge from ABI and packed with your order. A non-restrictive aerator is available to be installed inside our spouts (26 L/M at 500KPA). Features: – Progressive Cartridge Technology – PVD (Physical Vapour Deposition) – Precise Temperature Control Dimensions: – Diameter: 54mm – Spout Reach: 201mm
- Additional Information
- Product Documents
- Care Guide
- Shipping Times & Cost
Mixer: DR Brass Body, Ceramic Cartridge
|Finish / Coating||
(PVD) Brushed Brass – ABI’s Heat Shield – Industrial Grade Electro Colouring System (Physical Vapour Deposition)
|Mixer Dimensions (mm)||
|Spout Dimensions (mm)||
Spout reach 201
x1 Milani Mixer, 1 x Wall Mounted Spout
25 years structural warranty
Our recommended care guide can be found here
Please check all items within 3 days of receiving your order. If you have any concerns, do not install your product.
Please email [email protected] with photographic evidence of the issue and we will be in touch.
All items must be returned via the original place of purchase.
For all orders placed online or in store in our showroom, please visit our Returns Portal.
Shipping Times & Cost
ABI’s warranty does not cover external use due to the coatings being put under much harsher conditions and UV light. However the structural integirty of the tap would be fine.
Yes this completely up to the customer, the plumber will install onsite with the mixer or spout on left or right side.